Monthly Archives: October 2017

Automotive Tips from Jerry Lambert Automotive: Alignment Inspection

Uneven tire wear, the car pulling to one side or a steering wheel that is off-center are signs for Salt Lake City drivers that their wheels may be out of alignment.When doing an alignment inspection, the service advisor at Jerry Lambert Automotive will inspect your tires for uneven wear as well as suspension and steering parts for signs of wear or damage. He?ll also compare your current alignment with the vehicle manufacturer?s settings.Your vehicle owner?s manual will have a recommendation for when to check alignment. Of course, this recommendation is based on normal driving. If you have been in a crash, hit a curb/pothole, frequently drive off-road around Salt Lake City, or notice any symptoms of misalignment, have your Jerry Lambert Automotive service advisor perform an important alignment check.Jerry Lambert Automotive398 E 3300 SSalt Lake City, Utah 84115801-466-8226http://jerrylambertautomotive.com

Categories:

Alignment

Severe Service Requirements

A lot of Salt Lake City drivers have asked whether or not they should use their severe service maintenance schedule, which is listed in their vehicle's  owner's  manual. It can be somewhat confusing, so we decided to consult an expert. Cricket Killingsworth is from QMI/Heartland, a manufacturer of automotive products and fluids. She's been in the automotive business for over 30 years and is a speaker, a trainer and a writer. Cricket says there's so much confusion on this topic because, "Most owner's manuals actually have two maintenance schedules. Sometimes these are called 'regular service' and 'severe service.' Sometimes they're simply called Schedule 1 and Schedule 2. A severe service schedule recommends that things like an oil change, air filter replacement and transmission service be done more often: either in fewer miles or in less time." Foreign and domestic vehicle manufacturers create a specific schedule for each vehicle they manufact ... read more

Categories:

Maintenance

Jerry Lambert Automotive Service Tip: Why Synthetic Oil Is Good For Your Vehicles

Hello Utah! Today's vehicle care topic is: Synthetic Oil vs. Petroleum Based Oil. Synthetic motor oil is a substitute for petroleum based oil. If you aren't currently using it, why not? Synthetic motor oil maximizes engine power and fuel economy. To see why, we'd need a microscope, so we'll have to settle for using our imaginations. The molecules of conventional motor oil are long hydrocarbon chains. Synthetic motor oil, on the other hand, has uniform, round molecules. Which is slipperier, a pile of pencils or a pile of marbles?Synthetic motor oil lubricates better because there's less friction. This results in myriad benefits: better wear protection, cooler operating temperatures, more power and better fuel economy. And synthetic oil doesn't sludge up like conventional oil so it prevents those small oil passages from clogging up. (We see that too often at Jerry Lambert Automotive in Salt Lake City.)Some manufacturers are exten ... read more

Categories:

Fluids

The Jerry Lambert Automotive Guide to Custom Wheels

If you're interested in customizing the wheels and tires on your vehicle, there are a few things you should know first.Most importantly, the wheels you buy need to fit your vehicle. Not all wheels are created equal. Too many Salt Lake City drivers have bought a set of wheels that caught their eye, then, after going to the work of mounting them, have found that the wheels don't fit right and the tires rub against the vehicle when they turn or go over a bump.To ensure a proper fit, you can consult with your Jerry Lambert Automotive tire professional. He/she can also help you find tires that are suited to your driving habits as well as your vehicle. You may find their auto advice invaluable, and you'll probably be happier with your new wheels once you purchase them.But if you just have to have that set of wheels, and you're willing to pay for them, you can modify your vehicle to fit the wheels. Again, yo ... read more

Categories:

Tires and Wheels

Positive Crankcase Ventilation ? PCV Valve Service at Jerry Lambert Automotive

Hello Salt Lake City! Did you know that the first federally-mandated emissions control device was introduced in the 1960's? The Positive Crankcase Ventilation valve, or PCV valve, has been installed in Utah vehicles since 1964 and represents the first legislation by the United States government to regulate harmful emissions as well as to improve performance in the country's vehicles.The PCV valve, as you can probably guess, is located on the crankcase. The crankcase is the lowest part of a vehicle's engine. It houses the crankshaft and the engine oil. The crankshaft connects to the pistons that power the engine.Pistons are pushed down when fuel is burned in an engine. This causes the crankshaft to rotate, which sends power to the transmission.  It ultimately turns the axles and causes the vehicle to move. Some of the gases released by the burning fuel squeeze around the pistons and down into the crankcase.If the escaped gases mix with the engine o ... read more

Categories:

Exhaust